nm_setting_ip6_config_new ()

NMSetting *
nm_setting_ip6_config_new (void);

Creates a new NMSettingIP6Config object with default values.

nm_setting_ip6_config_get_ip6_privacy ()

NMSettingIP6ConfigPrivacy
nm_setting_ip6_config_get_ip6_privacy (NMSettingIP6Config *setting);

Returns the value contained in the “ip6-privacy” property.

nm_setting_ip6_config_get_addr_gen_mode ()

NMSettingIP6ConfigAddrGenMode
nm_setting_ip6_config_get_addr_gen_mode
                               (NMSettingIP6Config *setting);

Returns the value contained in the “addr-gen-mode” property.

Since: 1.2

nm_setting_ip6_config_get_token ()

const char *
nm_setting_ip6_config_get_token (NMSettingIP6Config *setting);

Returns the value contained in the “token” property.

Since: 1.4

nm_setting_ip6_config_get_dhcp_duid ()

const char *
nm_setting_ip6_config_get_dhcp_duid (NMSettingIP6Config *setting);

Returns the value contained in the “dhcp-duid” property.

Since: 1.12

nm_setting_ip6_config_get_ra_timeout ()

gint32
nm_setting_ip6_config_get_ra_timeout (NMSettingIP6Config *setting);

Since: 1.24

NM_SETTING_IP6_CONFIG_SETTING_NAME

#define NM_SETTING_IP6_CONFIG_SETTING_NAME "ipv6"

NM_SETTING_IP6_CONFIG_IP6_PRIVACY

#define NM_SETTING_IP6_CONFIG_IP6_PRIVACY "ip6-privacy"

NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE

#define NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE "addr-gen-mode"

NM_SETTING_IP6_CONFIG_TOKEN

#define NM_SETTING_IP6_CONFIG_TOKEN "token"

NM_SETTING_IP6_CONFIG_DHCP_DUID

#define NM_SETTING_IP6_CONFIG_DHCP_DUID "dhcp-duid"

NM_SETTING_IP6_CONFIG_RA_TIMEOUT

#define NM_SETTING_IP6_CONFIG_RA_TIMEOUT "ra-timeout"

NM_SETTING_IP6_CONFIG_METHOD_IGNORE

#define NM_SETTING_IP6_CONFIG_METHOD_IGNORE "ignore"

IPv6 is not required or is handled by some other mechanism, and NetworkManager should not configure IPv6 for this connection.

NM_SETTING_IP6_CONFIG_METHOD_AUTO

#define NM_SETTING_IP6_CONFIG_METHOD_AUTO "auto"

IPv6 configuration should be automatically determined via a method appropriate for the hardware interface, ie router advertisements, DHCP, or PPP or some other device-specific manner.

NM_SETTING_IP6_CONFIG_METHOD_DHCP

#define NM_SETTING_IP6_CONFIG_METHOD_DHCP "dhcp"

IPv6 configuration should be automatically determined via DHCPv6 only and router advertisements should be ignored.

NM_SETTING_IP6_CONFIG_METHOD_LINK_LOCAL

#define NM_SETTING_IP6_CONFIG_METHOD_LINK_LOCAL "link-local"

IPv6 configuration should be automatically configured for link-local-only operation.

NM_SETTING_IP6_CONFIG_METHOD_MANUAL

#define NM_SETTING_IP6_CONFIG_METHOD_MANUAL "manual"

All necessary IPv6 configuration (addresses, prefix, DNS, etc) is specified in the setting's properties.

NM_SETTING_IP6_CONFIG_METHOD_SHARED

#define NM_SETTING_IP6_CONFIG_METHOD_SHARED "shared"

This connection specifies configuration that allows other computers to connect through it to the default network (usually the Internet). The connection's interface will be assigned a private address, and router advertisements, a caching DNS server, and Network Address Translation (NAT) functionality will be started on this connection's interface to allow other devices to connect through that interface to the default network. (not yet supported for IPv6)

NM_SETTING_IP6_CONFIG_METHOD_DISABLED

#define NM_SETTING_IP6_CONFIG_METHOD_DISABLED "disabled"

IPv6 is disabled for the connection.

Since: 1.20

enum NMSettingIP6ConfigPrivacy

NMSettingIP6ConfigPrivacy values indicate if and how IPv6 Privacy Extensions are used (RFC4941).

enum NMSettingIP6ConfigAddrGenMode

NMSettingIP6ConfigAddrGenMode controls how the Interface Identifier for RFC4862 Stateless Address Autoconfiguration is created.

Since: 1.2